The Hitachi C10FCG is a 2-in-1 cordless circular saw that offers both power and portability.
It weighs in at about 8 pounds, which means it can be carried with ease by most people.
The blades are also very easy to change out because the design of the blade guard makes this possible without the use of any tools.
This is an important feature for people who have a lot of different projects going on all at once, as they can simply switch from cutting wood to cutting metal with just a few second’s worths of work.
Table of Contents
Hitachi C10FCG Review & Features
Size and Construction
The Hitachi C-series cordless circular saws are designed to be lightweight and easy to carry.
They’re at least half the weight of many competitors’ models, which is a huge advantage for those who have multiple projects going on simultaneously or work in tight spaces.
The blades also can’t handle as much abuse before they need replacing (since it takes only seconds), but that’s an acceptable tradeoff when you consider how long your battery will last compared with other brands’.
Motor/Power
The motor and power on the Hitachi C-series cordless circular saws are quite impressive.
They’re powerful enough to handle all but the most demanding jobs, with a maximum cutting depth of five inches in wood or seven in metal (depending on blade type).
Cutting Capacity
The Hitachi C-series cordless circular saws are impressive in every measurable area, but the one that stands out most is cutting capacity.
These models offer a blade size of either 14 or 16 inches (depending on model) at a depth of up to five inches for wood and seven for metal–enough to get through any job you’re likely to encounter.
User Experience
The Hitachi C-series cordless circular saws are lightweight and easy to handle.
The blades and guards come off quickly, making it very simple to change over the blade type or adjust a cut depth.
One downside is that these models can only be used with an 18-volt battery you need two for jobs requiring more than one battery charge (which means you’ll have to buy at least three).
Hitachi C10FCG Review: Pros and Cons
Pros:
- cutting capacity
- lightweight
- and easy to handle
Cons:
- only compatible with an 18-volt battery
- requires two batteries for large jobs
FAQs
How do I change the blade on my Hitachi miter saw?
Remove the side cover from the saw, and loosen the blade tension wheel with a screwdriver or wrench (depending on which model you’re using).
Loosen it enough so that when you press down on one of the pawls, they can move freely in their slots without binding at all. Then rotate them to an open slot for easy removal of blades.
Change over any additional blade types as needed before replacing anything back together again.
Keep track of your screws they may have different lengths or sizes depending on how many are used during the installation process. It’s very simple if you follow these steps!
How do I change out my blade?
To remove a blade from its arbor, simply rotate the blade tension wheel counterclockwise until it clicks off.
Then, using a screwdriver or wrench depending on your model (see above), slip out the blades from their slots–they click in and should come right back out if you did everything correctly.
Will the blades come out of order?
The blades are numbered and will be in the same order when you remove them. Keep track, because they go back together in a specific way that allows for easy installation later on!
How do I know how many different blade types to keep around?
There is no magic number you may just need one or two extra sets depending on your individual needs.
Hitachi vs Daikin What are the differences?
They both offer up good products, but Daikin has a stronger following in Europe and Australia. Hitachi has better customer service with an easier-to-navigate website if you need help ordering or replacing blades.
Hitachi vs voltas which is better?
It depends on what your needs are, but a lot of people say that Volta’s blades last longer and they do not need to change them out as often.
Hitachi has more variety in their blade sets depending on the size unit you have installed and it’s easier to find replacement parts for them if something breaks down.
Is Hitachi now Metabo?
No, but Metabo does sell Hitachi tools.
Is there a throat behind the blade on a Hitachi fan?
Yes, this is why you need to make sure that your blades are properly aligned when they spin, or else it can throw off airflow and cause rotary stress in the motor too.
Safety Tips
Interchangeable Tools: Hitachi’s line of tools are designed for maximum versatility, and they come with a wide selection of interchangeable blades. Whether you need to cut metal or plastic, the blade is right there waiting to be swapped out by simply pressing down on the lever that holds it in place.
Ease of Use: One of the most notable features of this particular model is its easy-to-use design, even without reading any instructions you can figure out how to install new blades.
The one-touch button will pop up automatically when you press down on it and release at your command as well so no more having to deal with pesky buttons while battling gravity!
Even if something does go wrong, like accidentally slicing a finger on the edge, there’s nothing to worry about because this machine is safety-certified.
Final Verdict
The Hitachi C12FCG exceeded my expectations in every way possible with an easy-to-use blade change system and fast cutting speed.
It also comes at a relatively low price point for what you get making it perfect for home DIY projects or professional work alike!
Although some users have mentioned that they experience difficulty installing blades because of their tight fit, I had no such issues when using this model myself.
While cheaper models may exist out there, ultimately the quality of your cuts will be much better if you spend more money now than later on replacement blades due to chipping, etc. Overall, this is a great product.
