7 Best Sliding Miter Saw For Homeowner 2024 Guide

* If you click a link on this page and make a purchase, we may receive a small commission at no extra cost to you. Learn more.

Are you looking for a good sliding miter saw for homeowner? Then read on to find the best sliding miter saw for the homeowner and what makes the best sliding miter saw. In this write-up will get to learn what to look for before you buy a particular sliding saw. Quality, price, durability are part of the factor one need to consider, but there are other important factors. Also, we will disclose the best sliding miter saw for a homeowner among our selected best sliding miter saw for the homeowner.

Let start the discussion of 7 best sliding miter saw for homeowner with a comparison table that will detail their price, weight customer rating.

Our Favorite Picks 

Model Price Weight Editor Rating
Dewalt Dws779

DEWALT Sliding Compound Miter Saw, 12-Inch (DWS779)

Check Current Price 67.3Ibs 4.8
Dewalt Dw715

DEWALT 12-Inch Miter Saw, 15-Amp, Single Bevel, Compound (DWS715)

Check Current Price 48.5Ibs 4.7
Metabo HPT

Metabo HPT Compound Miter Saw, 10' Miter Saw with Large Table Saw for woodworking, Power saw with...

Check Current Price 28.6Ibs 4.5
Bosch Gcm12Sd

BOSCH GCM12SD 15 Amp 12 Inch Corded Dual-Bevel Sliding Glide Miter Saw with 60 Tooth Saw Blade

Check Current Price 79Ibs 4.6
Makita Ls1018

Makita LS1018 10” Dual Slide Compound Miter Saw

Check Current Price 57Ibs 4.0
Genesis Gms1015Lc

Genesis GMS1015LC 15-Amp 10-Inch Compound Miter Saw with Laser Guide and 9 Positive Miter Stops ,...

Check Current Price 32.9Ibs 4.2
Makita 12

Makita LS1221 12' Compound Miter Saw

Check Current Price 48.8Ibs 4.5

The Seven Best Sliding Miter Saw For Homeowner:


1. Dewalt Dws779 – Best Miter Saw For The Money


 

DEWALT Sliding Compound Miter Saw, 12-Inch (DWS779)

Check Current Price

The DWS779 12-inch sliding miter compound saw is a beast of a saw that can in no way conceive of anything you can imagine and of quite a few things that you have. This will cut through timber that is up to 6.75 inches thick, for example. Just as impressive; it can cut the sliding rails and big 12-inch blade through a 16-inch wide piece of lumber way. It makes for a better saw of 12 inch DeWalt miter. It is a powerful device with a 15-amp motor, and it’s easy to see why this made our list tops.

These days, most miter-saws will bevel to at least one leg. The DWS779 can bevel to beyond 45 degrees on both sides. Its fence is made in such a way that it will make way for the blade to be inserted. This brand made with an inbuilt dust bag system that will prevent a situation where woodworkers will be dusted, although the majority of saws have an inbuilt dust bag. The trap is that it is a found heavy and high-priced, but we believe the tradeoff is well worth it.

Pros

  • It cuts lumber up to 2X16
  • It is blessed with a 3-year warranty
  • It is designed with a powerful 15-amp motor
  • It is double 45-degree bevel
  • It has a working dust collector system

Cons

  • It is Pretty bulky
  • It quite expensive

Our Verdict

This saw has proven to be a real workhorse when it comes to precision and durability. It is well constructed and made with enough power to simplify any task, and it offers quick and precise cuts. This DeWalt device is designed with more exceptional features that make it the best on the market. It also has a tremendous easy-to-read bevel scale and having wear-reducing protective pads on the stainless steel plates.

Sale
DEWALT Sliding Compound Miter Saw, 12-Inch (DWS779)
  • Stainless steel miter detent plate of the 12-inch miter saw blade comes with 10 positive stops
  • The mitre saw has a precise miter system and machined base fence support
  • Precise miter system and machined base fence support Cam-lock miter handle with detent override delivers quick and accurate...
  • Tall sliding fences support 6-3/4-inch base vertically

2. Dewalt Dw715 – Best Cheap Miter Saw


 

DEWALT 12-Inch Miter Saw, 15-Amp, Single Bevel, Compound (DWS715)

Check Current Price

This best cheap saw features a blade lock, a thin carbide blade, and dust bag containment. It is 15 amps, which gives it a lot of strength, while a high sliding fence can handle materials up to 5 inches. The adjustable locking plate offers 11 convinced stops. It offers a greater variety of types of cuts that you can do without overfishing with the parameters and allows you to create repeatable precision cuts. Cam locknut handle and replacement clip for quick angles. Framing and crown molding are made easier by cutting ability and consistency when you find the cut you need to make.

It is difficult to make compound cuts with a single-phase tool while it is easy with double phase but this cost-effective Dewalt DW715 makes cutting easier. It’s easier to move as it weighed 42 pounds and cleaning up is easy as it was designed with an optional dust bag. It has safety’s sake with an electric brake. Also, a cutting guide would have been useful, but if you are looking for a standard saw on a budget for experienced handlers, this might be the one.

Pros

  • It features 14 positive stops with stainless steel miter detent cover.
  • It has Precise control system and support for fence based software.
  • It has standard bevels.
  • It is cost-effective
  • It has incredible intersection ranges.

Cons

  • It lacks excellent usability features
  • Some models did not have a parallel fence.

Our Verdict

This is a well-constructed device that delivers the most precise and beautiful cuts. The DeWalt DW715 is suitable for custom work, has excellent angle adjustment, and runs smooth and clean. We love accurate gauges, and the XPS positioning LED that uses blade shadow to cut. Glamorous.

Sale
DEWALT 12-Inch Miter Saw, 15-Amp, Single Bevel, Compound (DWS715)
  • Stainless-steel miter detent plate of 12-inch miter saw blade comes with 14 positive stops
  • The mitre saw features the precise miter system and machined base fence support
  • Tall sliding fence of DEWALT miter saw supports 5-1/2-inch base vertically
  • Bevels 0 degree - 48degree to the left and 0 degree- 3degree to the right. Tool height-15 inch

3. Metabo HPT – Best Chop Saw


 

Metabo HPT Compound Miter Saw, 10' Miter Saw with Large Table Saw for woodworking, Power saw with...

Check Current Price

Metabo HPT provides an outstanding miter-saw at a very low price. It has a smaller 10-inch blade that can’t cut through larger lumber, but it’s an excellent choice for 2X6 inches and smaller. The tool can cut anything that a blade touches, fitted with a potent 15 amp engine with equal power. With the knife slicing, the metal slicing is fine.

For the majority of 12-inch high-quality saws, we find one element that is incredibly heavy and voluminous. You would not want to switch them around constantly. This tool is better suited to a workspace, since it is portable, but if you switch out of the workplace to a project, it’s a bonus that you enjoy the compact size and versatile of Metabo HTP. Although, this device is cheap and smaller than other devices it’s still has a 5-year warranty that will provide peace of mind.

Pros

  • It is cost-effective
  • It is sturdy with a 15-amp motor
  • It is lightweight and compact
  • It has a 5-year warranty

Cons

  • It has a 10-inch blade that can’t cut bigger lumber

Our Verdict

We like the fact that this device isn’t too difficult-it offers the best amount of what you need and want in a chop saw. Ready to go out of the box, it’s a durable, efficient, and versatile tool that performs well on a variety of durable support materials. With its blade inclusion, the device is clean, sharp cuts, and is not too heavy-the soft grip makes it easy to hold.

Metabo HPT Compound Miter Saw, 10" Miter Saw with Large Table Saw for woodworking, Power saw with...
  • LARGE TABLE SAW 10 INCH : Metabo HPT's compound miter saw offers better material support with its vice clamping system to...
  • PORTABLE DESIGN: The compound miter saw from Metabo HPT is lightweight, at only 24.2lbs. Our portable miter saw is easy to...
  • POWER SAW FOR PRECISE WOODWORKING: this durable woodworking tool is equipped with a 15 Amp motor to deliver high power for...
  • SAFETY FEATURES: This miter saw includes an electric brake that halts the rotation of the blade within seconds. The built-in...

4. Bosch Gcm12Sd – Best Miter Saw Blade


 

BOSCH GCM12SD 15 Amp 12 Inch Corded Dual-Bevel Sliding Glide Miter Saw with 60 Tooth Saw Blade

Check Current Price

Bosch Power Tools miter saw has a lightweight size, long-lasting mechanism, and long life. Compared to other saws, you can save 12inches of space. This best miter saw assists with several cuttings. This saw clamping is stable and advantages in a continuous function. The high-speed motor produces 15Amp-3hp. Contractors may use it for technical work, but for delicate tasks, it is a bit heavy. Bosch GCM12SD’s cut-outs are so smooth that no other device can match that consistency. The glide method helps with precise alignment to allow full cross-cuts. It has various cutting capacities including extended by 14 inches, horizontal by 6-1/2 inches, and vertical by 6-1/2 inches.

Carpenters consider it the perfect miter saw for technical tasks and furniture construction. Bosch miter saw provides dust collection at 90 percent, which is better than other saws. You don’t have to change the bolt since it locks the fence securely to the table at 90 degrees.

In addition to the miter, the Bosch GCM12SD is fitted with a dust bag, blade wrench, carbide comb, and user manual. Bosch Power Tool has been the strongest miter saw so far, with its high-tech features.

Pros

  • It has an impressive blue design
  • It has a powerful motor
  • It has a soft trigger handle
  • It has a controllable glide movement

Cons

  • It is quite expensive
  • It is bulky

Our Verdict

The Bosch GCM12SD can certainly impress not just with its smooth, precise cuts but also with the powerful motor and the pace of cutting through material like a breeze.

The buttons are easy to use, and it makes it so much more convenient to have it upfront. It has built-in extensions along with the dust control that keeps the work area reasonably lean, which are nice to have.

BOSCH GCM12SD 15 Amp 12 Inch Corded Dual-Bevel Sliding Glide Miter Saw with 60 Tooth Saw Blade
  • AXIAL GLIDE SYSTEM: patented glide system allows wider cross cuts and better alignment while also being compact, saving you...
  • CAPACITY: expanded cutting capacity, 14 inch horizontal capacity nominal 6 1/2 inch vertical capacity against the fence base...
  • ADJUSTABLE: provides easy adjustments with a large, easy-to-read uniform bevel and stainless steel miter scales with marked...
  • PRECISION: square lock quick release fences lock fence 90 degree to the table and requires no adjustment, 1 touch lock/unlock...

5. Makita Ls1018 – Best 12 Inch Miter Saw Blade


 

Makita LS1018 10” Dual Slide Compound Miter Saw

Check Current Price

Another good option for those who need a powerful miter saw for home use is the Makita LS1018 10-Inch Dual Slide Compound Miter Saw. It comes with a 13-Amp motor that can turn the blade to an impressive 4,300 RPM that can make soft and hardwood fast work. It comes with a smooth start, as well. This function ensures the startup should place less stress on the engine, while still allowing it to run full bore while in operation, which extends its life considerably. It also comes with a decent angle set, as it can miter up to 47 degrees to the left and 60 degrees to the right.

Although this model has only a 10-inch blade, it can cut at 90 degrees up to 12 “and cut at 45 degrees a board 8-1/2” wide. The one major issue with this layout is that it labels the degrees using a sticker. For a machine of this size, that’s low quality, and there’s a chance to wear off with use, which is a significant issue, even though the rest of the system works well.

Pros

  • It is powerful
  • It has a right angle range
  • It has excellent capability
  • It is easy to operate

Cons

  • Sticker marker

Our Verdict

We like the fact that this device is easy to operate, which offers the best amount of what you need and want in a miter saw. This tool makes accurate, beautiful cuts with simple bevel changes, perfectly balanced, and ready to go straight out of the box. The slide functions smoothly, and a nice feature is a soft start.

Makita LS1018 10” Dual Slide Compound Miter Saw
  • Powerful 13.0 AMP direct drive motor requires less maintenance and delivers 4,300 RPM
  • Miters 0° - 47° left and 0° - 60° right, with positive stops at 0°, 15°, 22.5°, 31.6°, 45° (left and right)
  • Cuts up to 12” at 90° and 8-1/2” at 45°
  • Linear ball bearing system engineered to deliver "dead-on" accurate cuts

6. Genesis Gms1015Lc – 10 Inch Sliding Miter Saw Cut


 

Genesis GMS1015LC 15-Amp 10-Inch Compound Miter Saw with Laser Guide and 9 Positive Miter Stops ,...

Check Current Price

The performance of Genesis Power Tools is what people look at for their DIY designs. The blade is good enough for fine cuts, with no additional component needed. Genesis GMS1015LC is the best miter saw since it is useful for small tasks. The method is suitable for molding crowns, photo frames, and cases. The Genesis GMS1015LC is quite small but has all the critical components of a miter saw.

The Genesis GMS1015LC components include a 15 Amp battery, 60 T carbide blade, lock, blade wrench, and a dust pack. It also has two laser batteries and two wings of extension. Unlike the rival models of the 14 Amp engine, the engine speeds output with 4600 RPM. At 45 degrees with nine intervals, the user will operate with bevels to the left and right. The compound miter cutting is simple and provides flexible cutting for hobbyists and carpenters alike. For homeowners, the Genesis laser compound is the perfect miter saw.

Using a break to stop the device, enables the user to operate at specific intervals. Changing the blade through the Arbour lock is also convenient. Alternatively, the clamp locks down the device while the user is busy adjusting the components. The 60 dent blade is appropriate for fine cuts without adding more blades.

When we’re talking about delicate jobs, the Genesis GMS1015LC is still the best miter yet. For new users, this lightweight 1Ibs device is simple enough. Nonetheless, beginners can use the laser guide to get more accuracy. Also, skilled craftspeople can use Genesis miter to improve their business.

Pros

  • It comfortable and suitable for woodworking and delicate tasks
  • It is light weighted
  • It is battery powered tools
  • It is a high-quality laser machine
  • It is a readable miter saw

Cons

  • Not ideal for large pieces

Our Verdict

This device can not beat in its versatility. Adaptable to several materials and various applications, and as it slices, we consider it to be quieter than other versions too. For most projects, it works well, and the engine provides the best power to push through the more challenging work without any problem. Many excellent features are too long to mention, all packed in an impressively lightweight build.

Sale
Genesis GMS1015LC 15-Amp 10-Inch Compound Miter Saw with Laser Guide and 9 Positive Miter Stops ,...
  • Make bevel cuts up to 45 degrees left | perform compound Miter cuts with ease!
  • Use compound cutting for crown molding, shadow boxes, Picture frames, and more | the Genesis compound Miter saw is...
  • Laser cutting guide for quicker alignment and improved accuracy | Know where the cut will be ahead of time with the...
  • Electric brake stops the blade in seconds and Arbor lock for quick blade changes

7. Makita 12 – Dual Bevel Compound Miter Saw


 

Makita LS1221 12' Compound Miter Saw

Check Current Price

This best double bevel miter compound saw (MAKITA 12) is known for its well-designed features and controls. It is a smooth-running unit that is easily assembled for precise working. The bevel cuts can be adjusted to an angle of 90 degrees and have linear ball bearings which are crucial for flexibility in both rails. This Makita 12 will deliver an accurate, high cutting output straight out of the box. This powerful tool features a proprietary retractable guard mechanism for increased vertical cutting capacity and the greatest cutting power for crown molding. The strong 15-amp soft start, direct gearbox motor never slips or bogs down like belt-driven saws. For smoother, it has high-quality cutting with electronic Speed Control that holds a steady speed under load.

Pros

  • It is durable and easy to operate
  • It easy for mobility
  • It has bevel detent release and miter lock

Cons

  • It does not have a soft start.
  • It bevels gauge does not have positive stops
  • It has zero styrofoam in the box.

Our Verdict

this Makita dual bevel mixing tool cuts and slides accurately and easily to tackle all kinds of carpentry projects. It is easy to carry. The 15 amp motor provides more than enough power to handle all tasks. The enormous 12-inch blade makes it easier to cut larger molds, and the laser is a great asset. Simple to change and install, and excellent value for money.

Makita LS1221 12" Compound Miter Saw
  • Large cutting capacity (3-7/8" x 6" at 90°)
  • 4-1/2" tall pivoting fence for cutting up to 5-1/2" crown molding
  • Powerful 15 AMP direct drive motor delivers 4,000 RPM for smooth performance
  • Positive miter stops at 9 settings; 15°, 22.5°, 31.6°, 45° right or left and 0° (90° cuts)

Compound Miter Saw Vs Miter Saw

Miter saw: The milter saw usually cuts vertically. The vertical cut is perpendicular to the cutting board. The miter saw helps to cut a real and accurate angle calculated from the board’s front edge and to replicate the same angle in subsequent cuts.

Compound saw: The vertical angle of the cut is variable (measured concerning the board’s primary surface). The compound saw can be set to achieve and sustain a precise, repeatable vertical angle that is determined by reference to the board surface.

Compound miter saw: This is a mixture of compound and miter saw versatility, so that a cut can accommodate different angles both through the board’s depth and through its width.

Single Bevel Vs Dual Bevel Miter Saw

Single-Bevel Saws

Most single-bevel saws have identical cutting capacities, a 12-in-wide board crosscut. Those saws weigh 36 pounds. – 42 pounds. Every single bevel has some kind of table extension, although some are laser inclusive.

Dual-Bevel Saws

Dual-bevel saws allow you to make opposite bevels without having to rearrange the piece of what you cut. It saves time and does away with uncertainty. The dual-bevel often saws up the ante on price and quality. They’re all more polished and specific about it. Of course, you pay in terms of both cost and quality for a better product. Most of those saws range between 43Ibs – 55lbs. They all have similar capacities for cutting and the ability to miter in both directions beyond 45 degrees.

Buying Guide For Best Sliding Miter Saw For Homeowner

There are so many wonderful sliders miter saw on the market, but the above-listed sliding has selected as the best slider. Everyone has a different set of features, different sheet sizes, and different price tags. But how do you choose the best sliding saw for yourself as an owner? This small buying guide will help you determine what features and functionalities you need if you’re still trying to choose between them.

Blade Size

One of the most evident distinctions that distinguish each of these saws is the thickness of the blade. The smallest blade on the list is 10 inches while the largest blade is 12 inches. Saws with a 10-inch blade are in between these two types. A larger blade may also cut the different weights, this will be determined by the height of the blades. Although all sliding miter tool has a peak point of cutting.

This is particularly critical when cutting and raising a basis to cut the dirty edge vertically. Some saws have a magnitude of just over 3 inches cutting overall. Others can cut pieces over 6 inches thick, so if you’re cutting thick pieces of wood or cutting large pieces of wood, you’re going to want a high maximum cutting depth saw.

Power

Power is another important parameter you should carefully consider before selecting a specific miter saw. When you want your central wood saw to cut a piece of the base table, your job is to position the wood correctly, adjust the blade to your target, lower the blade onto the wood and let the saw cut.

For a homeowner, the best sliding miter saw must be strong enough to allow the operator’s smallest application of force or pressure to slice the blade through the wood. But, in situate where your tool requesting a lot of pressure to apply before it can cut your wood, there is probably a problem with this. It is not powerful enough.

Accuracy

I agree that the essential features of any miter saw must be accurate. You don’t have to justify why you need to have the efficiency of your slide saws or of any other carpentry tool you use in your home if you’re a skilled carpenter.

When building a house or carpenter, in particular, the carpenter or cabinet finish, precision is important. Precision is necessary. And all the cuts you make are very important and as accurate as possible. It is very important. If the cutting saw is not cut accurately, the entire style is skewed and incorrect. So, accuracy is the number one yardstick you can use when assessing the suitability of a homeowner’s best sliding miter saw.

Sliding Rails

The size of the blade has an impact on the wood you are cutting, but that is not the only factor. Many screws have a mechanism for railing the blade, which helps it to travel around and through the width of the log. A 16-inch long cut is made with your central saw by some of the better 12-inch screws, so you can cut big parts. Even a small blade like a 10 “cut passes through 28 with a sliding rail device. Why pick a saw of 10 inches instead of a saw of 12 inches for the same size? Size, weight, and portability are just a number of components.

Size, Weight, and Portability

Many operators were messing up and holding it on the table, never going. Sometimes saws, on the other hand, are seen moving continuously, brought from work to work or to the workplace, in which this moment is more convenient.

In these cases, a smaller and lighter saw may be a significant benefit. Two of the 12 centimeters measured saws were almost GBP 90. Some smaller parts of the mountains, however, weighed under 30 pounds. If you know you want to push a lot of saws, we advise you to look for a smaller, more compact website. It’s much more convenient to travel.

Extra Features

A lot of the most critical criteria for choosing the best sliding miter saw for homeowners have already been addressed, but additional features will certainly add a degree of convenience. For example, laser light enhances the visibility of the blade during cutting. Dust insulation systems are designed to avoid the entry of sawdust into the eyes and lungs and to keep it dirty in a small container. Although these often do not operate as you would like, some saws have a port on a vacuum stand which works very well in connection with a vacuum cleaner.

Warranty

Power tools live a tough life with regular work. That is why we are always searching for a reliable guarantee that will cover our investment. Over several years several big machine manufacturers have been shielding their materials. DEWALT, for example, has been protecting its devices for three years. Metabo HPT warrants an impressive five years for their tools. No matter what direction you take, check the warranty duration of the manufacturer to see how long your system is secured if unexpected damage occurs.

Final Words

The Dewalt DWS779 is the best sliding miter saw for homeowners. It is a perfect miter saw for both professionals and hobbyists. Whereas the DIYers love its user-friendliness, experts admire the high precision and smooth running. This model is an all-around miter saw with many useful features.

It is quite excellent in terms of safety. This is fantastic news for the unpracticed buyers because most individuals are trying to find out how such items work. So, during the process, a few of them get harmed. To prevent serious wounds, first go through the manual, before first using the device. The main advantage of this particular model is its flexibility. That is, you can use it for several tasks without having to think about compatibility and other trivial issues.

The DeWalt DWS779 is a great option for many DIYs that don’t want to spend a lot of cash but want a high-quality device. You can lurch on many things, but they can all be resolved in a matter of minutes. The most beautiful thing about this particular model is that it’s made from sturdy materials, and it will last a long time.

READ NEXT: